BayPanel 821-DA industrial panel monitors  

  Industrial / Information Data Monitor
  . . . 21.3" color TFT flat panel
  . . . 1600 x 1200 pixels (UXGA)
  . . . DVI and analog RGB input
  . . . Anti-reflection front glass
  . . . Aluminum housing
  • 21.3" (540 mm) UXGA Data Display
  • Display area: 432 mm (H) x 324 mm (V)
  • Aspect ratio: 4:3 (Landscape format)
  • Drive system: a-Si TFT active matrix
  • Display color: 16.7 million colors, 256 gray values
  • Pixel: 1600 (H) x 1200 (V)
  • Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical stripe
  • Dot pitch : 0.090 mm (H) x 0.270 mm (V)
  • Pixel pitch: 0.270 mm (H) x 0.270 mm (V)  
  • Contrast ratio: 550:1 (typ.)
  • Designed viewing direction: 85° Right, Left, Up and Down side (typ.)
  • Response time: Ton + Toff (10% - 90% - 10%) 25 ms (typ.)
  • Luminance: 250 cd/m2 at maximum IBL drive (typ.)
  • BayView AD5 DVI and analog RGB to 24-bit LVDS converter board
  • Analog RGB input: 162.5 MHz bandwidth, up to 100 kHz H-frequency, up to 200 Hz V-frequency (UXGA 60 Hz), H-sync.(+/-), V-sync. (+/-), Composite sync. on (G)reen and H-sync.
  • Picture position, phase and size recognition with automatic self-adjustment capabilities (auto-phase / auto-tracking)
  • Auto-scaling to maximum panel resolution (VGA, SVGA, XGA, SXGA up-scaling to 1600 x 1200 pixels)
  • On-Screen-Display (OSD) for user specific adjustments, like: intensity, contrast, color, backlight brightness, etc.
  • Setup parameters are saved in non-volatile memory
  • Gamma correction tables, 8x8 bit for R, G and B each
  • 26-socket DVI-D Molex connector as DVI input
  • DB15 connector (HD D-SUB) for analog RGB input (analog VGA standard connector)
  • DB9 connector (D-SUB) for Remote Control functions: Remote-OSD and Firmware updates using the RS232 port
  • Rear side placed OSD keypad, the Rack aluminum front bezel (-RA) is also available with OSD keypad at front (-K)
  • Milled aluminum front plate (10 mm thick) in following variants:
Aluminum Rack (-RA)
Front side mounting, 4x Ř 6.5 mounting holes
Finish: black, RAL 9005
Aluminum Décor (-DE)
Rear side mounting, 8x M4x7 thread holes
Finish: silver metallic
Stainless Steel Décor (-V2A)
Rear side mounting, 8x M4x7 thread holes
Finish: brushed stainless steel surface
  • 3 mm anti-reflection mineral glass or touch screen sensor pane
  • Robust aluminum chassis, 475 x 369 x 85 mm (WxHxD)
  • Mechanically protected connectors area
  • Euro line connector with integrated power ON/OFF switch, line fuse and line filter
  • AC-Line input: 85 to 264 VAC 50/60 Hz (integrated universal power supply)
  • Dimensions with -DE / -V2A / -RA front plates: 490 (w) x 400 (h) x 95 (d) [mm]
  • Conformities: IP20 (IP65 front plate / IP20 chassis), EN55011 Class A, FCC Class A, EN50081-1, EN50082-2, EN61000-4, UL1950 / EN60555 / EN60950 AM1, AM2, AM3

Product alternatives and Options:

  • Active RGB output, RGB loop through
  • DC-power input: integrated DC-DC converter with 24 VDC (18 to 36 VDC) or 48 VDC (36 to 72 VDC) input voltage (-DC24 or -DC48)
  • OSD keypad at front (-K)
  • Analog resistive touch screen (-T)
  • 6 mm bulletproof mineral glass pane (-P)
  • Housing handles set (for -RA front bezel variants)


  Power Input Euro AC line connector (DIN 49457 B)


4-pins Binder Series 680 DC connector with filter and screw-lock, 2x 12 VDC, 2x Ground

  DVI Interface 26-socket Molex DVI-D connector, 2 meter data cable
  Analog RGB Interface 15-socket HD D-SUB connector, 2 meter data cable, HSync. / VSync.: TTL signal level; RGB signals: 700 mV p/p, 75 ohm asym.
  Remote OSD Control 9-pins D-SUB connector, TxD and RxD V24 / RS-232 signals
Standard BayPanel 821-DA Monitors and Options:  
Order # Product Name Mnemonics
20-561-00-09 BayPanel 821-DA-DE-AC
-DA = DVI and analog RGB
-DE = Aluminum Décor front bezel
-V2A = Stainless Steel Décor front bezel
-RA = Aluminum Rack front bezel
-AC = Integrated Universal Power Supply
-DC24 = Integrated DC-DC Converter with nominal 24 VDC input voltage
-DC48 = Integrated DC-DC Converter with nominal 48 VDC input voltage
-K = OSD Keypad at front
-T = Touch Screen
Front Plate Finish Color:
xx-xxx-xx-00 = stainless steel
xx-xxx-xx-02 = black, RAL 9005
xx-xxx-xx-09 = silver metallic
20-561-05-09 BayPanel 821-DA-DE-AC-T
20-562-00-00 BayPanel 821-DA-V2A-AC
20-562-05-00 BayPanel 821-DA-V2A-AC-T
20-563-00-02 BayPanel 821-DA-RA-AC
20-563-05-02 BayPanel 821-DA-RA-AC-T
20-564-00-02 BayPanel 821-DA-RA-AC-K
20-564-05-02 BayPanel 821-DA-RA-AC-K-T
20-566-01-09 BayPanel 821-DA-DE-DC24
20-566-02-09 BayPanel 821-DA-DE-DC48
20-566-06-09 BayPanel 821-DA-DE-DC24-T
20-566-07-09 BayPanel 821-DA-DE-DC48-T
20-567-01-00 BayPanel 821-DA-V2A-DC24
20-567-02-00 BayPanel 821-DA-V2A-DC48
20-567-06-00 BayPanel 821-DA-V2A-DC24-T
20-567-07-00 BayPanel 821-DA-V2A-DC48-T
20-568-01-02 BayPanel 821-DA-RA-DC24
20-568-02-02 BayPanel 821-DA-RA-DC48
20-568-06-02 BayPanel 821-DA-RA-DC24-T
20-568-07-02 BayPanel 821-DA-RA-DC48-T
20-569-01-02 BayPanel 821-DA-RA-DC24-K
20-569-02-02 BayPanel 821-DA-RA-DC48-K
20-569-06-02 BayPanel 821-DA-RA-DC24-K-T
20-569-07-02 BayPanel 821-DA-RA-DC48-K-T
Order # Product Name Remarks
23-030-00-A-51 DV Front Handles Set 120mm black anodized aluminum
Datasheets Download:  
BayPanel 821-DA-DE-AC BayPanel 821-DA-DE-DC  
BayPanel 821-DA-V2A-AC BayPanel 821-DA-V2A-DC  
BayPanel 821-DA-RA-AC BayPanel 821-DA-RA-DC  
Baytek reserves the right to modify the information contained herein as necessary and the customer should ensure that it has the most recent revision of the data sheet. Baytek makes no warranty for the use of its products and bears no responsibility for any errors which may appear in this document.  
Last update: 02-03-11  
© 1996 - 2011, Baytek Industriesysteme GmbH, Germany  
[BayPanel 608-DA] [BayPanel 610-DA] [BayPanel 612-DA] [BayPanel 615-DA] [BayPanel 717-DA]
[BayPanel 719-DA] [BayPanel 820-DA]
[Tech. Update] [Trademarks]
[Overview] [BayPanel Monitors] [PgUp]